|
Post by shonuff on May 3, 2010 20:06:15 GMT -8
Looking for pics of the stock linkage including the choke and both throttle cables and how the cables are connected to the carb?.
Would also like to see how the choke and fast idle cable housings were secured/adjusted on the motor
Now for the info.
Anybody know the baseline/factory settings for the mixture and idle screw?
Any and all info will be greatly appreciated
|
|
|
Post by Carlyn Dinkler on May 4, 2010 4:09:02 GMT -8
Is the 3R# carburetor in a Corona RT43 or RT52? Manual or automatic? Carlyn Dinkler cdinkler@bellsouth.net
|
|
|
Post by shonuff on May 4, 2010 21:01:03 GMT -8
Lol.
This is a 3r in a LHD 1967 stout
Manual choke and fast idle, with cable linkage
Throttle is also cable
If you want the vin for info its in the registry
|
|
|
Post by justin on Jun 30, 2010 16:22:57 GMT -8
I used bike-brake-cables...? Hahaha, does that help??
|
|
|
Post by justin on Aug 22, 2010 11:36:36 GMT -8
Oh, and as for the routing of the cable, I used some old brakeline (to house the cable) so I'd get the angle correct. Otherwise, you have too funny an angle and it will end up cutting through the line.
|
|