Wiring up a universal key-switch

[justin]

Has anyone done this?
There's only 3 wires, so I'm not hugely concerned, I'm just wondering if someone can save me some time and tell me which is the constant (red/black maybe?) keyed (I'm thinking yellow/black) and ground (by process of elimination that leaves the white/black)

I've got a volt meter, but someone just telling me would sure be easier and take less time!

[justin]

Hmm, okay.
the universal switch is labeled: Bat, IGN, ACC, with a 4th post that is unlabeled.

The stout stock switch is labeled: IG, ST, AM, ACC

I'm thinking IG goes to IGN, the ACC post was unused on the original, so that leaves ST and AM...

[mnstout]

BW=ST
BY=IG
BR=AM
Blue/Red = ACC if you have it, which I think most do not.

Hope this helps. I wired in a utility ignition when I first got mine.

[justin]

mnstout-
Awesome help man!!