Corona RT-102 tail camshaft support bearing needed

[highcast]

Hello,

I own a 1975 Corona RT-102. It's a "sister model" of better known model RT-104, and it was originally delivered with 16R engine and 4-speed gearbox.
I have been repairing the car after the few years silence, and I've managed to get most of the parts I've been missing for it.
The most critical part I'm still missing is the propeller shaft bearing assy / center support.
There are few pictures available of the broken part: Click!

The original Toyota part number is 37230-20020, regarding to the Toyodiy website.

If you happen to own or know where to get one, I'm really interested of buying one, as this summers driving is depending of this part.

Please contact me by PM or by email.

[highcast]

This part was delivered directly to me as a new spare part by Carlyn Dinkler from this forum.

Once more, thanks to Carlyn for providing such a great service!

[Carlyn Dinkler]

A new replacement driveshaft center bearing and rubber assembly, 37230-CUSHB-NGS/A at $63.50 + postage that I stock, fits the RT6#/7# Corona Mark II series 02/69 to 12/71 and the Corona RT102/105/11# 08/74 to 01/77.

The Mark II part numbers are 37230-22012/22020/22013/22014 and the Corona part numbers are 37230-20020/20021.

It might also replace the 37230-20031/32 used on the Corona RT105/111# 01/77 to 08/78.

The assembly should work if it meets the following specs:
(1) The center bearing ID is 30mm and the bearing is 13mm thick.

(2) The rubber has two high ribs, with a wire inside to stiffen, that mount in the original metal frame which you reuse. These ribs are about 104mm in overall diameter and about 35mm center to center.
Carlyn Dinkler [e-mail]