|
Post by mnstout on Dec 16, 2008 19:43:14 GMT -8
I was going through some extra parts that I have and need some help with identifying some pieces. I have a carb that is marked, D3235A-3B, which I assume is a carb for a stout (looks like one). I also have one that is marked, DCA306-4BK 904 (under), that appears to have an electronic choke. Am I right in assuming the first one is for the Stout (what other models?) and what would the second one be for?
Did the intake and exhaust manifolds change at all with the model years for the Stout?
Thanks.
|
|
|
Post by litestout on Dec 18, 2008 15:46:51 GMT -8
YES THE MANIFOLDS DID CHANGE DEPENDING ON WHAT MODEL STOUT & WHAT MOTOR IS IN IT
|
|
|
Post by serikali on Dec 19, 2008 18:09:13 GMT -8
is there a way you can sell the stout carburetor to me? am looking for one of those carb for a 1965 toyots stout with a 3R engine 1.9 liter.let me know what you think of tahat/ Thanks, serikali.
|
|
|
Post by mnstout on Dec 20, 2008 19:18:40 GMT -8
Thank you Lite. I was checking into the manifolds and it appears there was a part number switch, I assumed it had to do with going to an assembly, but maybe not. The manifolds that I have are marked 17141-40010 (EX) and 17111-40010 (IN). I still haven't turned up anything on the other carb. It has the clear float window, but the primary and secondary are smaller in diameter, and what appears to be an electric choke. I'll post pictures on Monday when I can get to a better internet connection. SeriKali, I'll also post pictures of the Stout Carbs, and I sent you a personal message.
|
|
|
Post by mnstout on Dec 22, 2008 11:07:26 GMT -8
|
|
|
Post by litestout on Mar 5, 2009 3:38:40 GMT -8
the last four carbs are early datsun .you can adapt them to the stouts
|
|