|
Post by craazy86 on Aug 30, 2006 11:38:52 GMT -8
ok... so i'm swapping a 16v into my '86 corolla and i removed all the a/c components and since i'm not worried about overheatingi pulled the heater core as well...
do i need to loop the water lines? or can i block off the ports and get rid of the lines all together... i'm pretty sure i can, but i would like to be positive
|
|
|
Post by kpogi61 on Feb 25, 2007 16:56:12 GMT -8
instead of blocking it its recomended to loop and make the inlet and outlet meet. good luck
|
|