|
|
Post by 1interiano2 on Jul 27, 2012 1:45:41 GMT -8
I came across this beauty and had to buy it. I've been successful in making the engine start but now I have brake issues disabling me from enjoying my valuable possession. The brakes are hard to apply and recently I came across dripping from the brake reservoir/ master cylinder I believe. I am not sure if the lines are clogged since they are rusty or if other mechanical problems may be the issue. Any advice as well as suggestions would greatly be appreciated. Thank you guys in advance.
- Erik
|
|
|
|
Post by Carlyn Dinkler on Jul 27, 2012 10:17:37 GMT -8
If the brake M/C is dripping fluid, most likely you need to replace it. Try bleeding each wheel cylinder (get someone to help) and determine that each bleeds OK (no lines stopped-up). You may need wheel cylinders if the car has sat a long time and all are rusty or seized. Let me know what parts you want prices on when you decide what needs replacing.
Carlyn Dinkler, cdinkler@bellsouth.net
|
|
|
|
Post by 1interiano2 on Jul 28, 2012 0:46:58 GMT -8
Ok, I will get on that ASAP. Thanks for your time and advice. I will email you with my findings.
|
|
