|
Post by Carlyn Dinkler on May 28, 2009 3:01:35 GMT -8
Water Pump Thermostat Guide Plate----------------- In the aluminum water pump housing between the water pump & the head on the 3R# engines used in the Corona RT43/52, Stout RK41/41L, Crown RS40L/41L, and in the 3P used in the PK32 & 5R used in the RK101, there is a stamped sheet metal part that the thermostat sets on top of to position it between the water pump housing & the thermostat cover. Most of these are rusty and bad.
I have had these reproduced as a machined aluminum ring about 56.91mm OD x 45.08mm ID x 5.9mm Thick. 16128-40010 plate, water pump thermostat guide $18.25 Carlyn Dinkler, cdinkler@bellsouth.net
|
|