New Reproduction Rubber Parts for the RT43/52

[Carlyn Dinkler]

NEW RUBBER PARTS IN STOCK--------------------------------------
67871-95500 weatherstrip, rear quarter windows, coupe
single $22.19, pair $29.50
[this rubber slides in the slot on the front of the rear quarter window
chrome trim on the coupe and seals to the back of the door windows]

53881-20020 bumper, hood to fender sides
single $3.98, four are $8.00
[these go on the sides of the hood, two each side in the slots]

90480-19096 grommet, cylinder head cover $2.11
[these grommets are for the vent tube thru the valve cover on the
3RB/3RC with PCV, most or all 1965-70 Coronas in the USA]
US$ plus shipping Carlyn Dinkler, [e-mail]

[Carlyn Dinkler]

'New' items that I have ready to ship are:
Flywheels-----------------------------------------------------------------------------
13405-49015 flywheel, used, blasted & turned $130.00
All the faces have heat cracks but I have been assured that is normal and not a problem. Three ready to ship.

Window Runs----------------------------------------------------------------------------
I was not happy with the window runs that I was getting from another supplier because they were not exactly like the original 1965-70 Corona sedan window runs. These were more like the 1970-73 Corona & 1969-72 Corona Mark II. So I had one of my USA suppliers reproduce the original 1965-70 Corona sedan window runs and they are now packaged for sale. Window runs are difficult (at least I think they are) to install and if not like the original, much more difficult to install and the window may be difficult to raise & lower if the window run is not the correct shape.

6814X-20010-REPRO window runs, sedan front & rear $21.19
Each package contains 78" of window run with instruction to cut to size. If a longer piece is needed (like for the pickup truck) add $0.27 per inch and I will package some for that application.

Heater Control Valves & Parts-----------------------------------------------------------
The rubber controller (90099-06019 $16.25) & the (original aluminum) casting (87240-CASTI-NG $111.25) for the heater control valve for the Corona RT43/52 & RT4#/5# from 07/66 to 01/70 have been completed and are available as individual parts, or packaged as rubber & casting, or packaged as a complete water valve assembly with hoses & clamps to install:

81240-REPAI-RKIT RT4#/5# heater valve repair kit $125.00
new casting (zinc insteard of aluminum) & rubber controller

87240-20050 remanufactured heater valve, short arm $155.00 (none available, parts to be replated)
RT43/52 about 07/66 to 12/67, RT4#/5# about 07/66 to 10/68
new casting, new rubber, steel parts replated, hoses & clamps to install
ADD $25 if old heater valve core not returned

87240-20150 remanufactured heater valve, long arm $155.00
RT43/52 about 12/67 to 01/70 , RT4#/5# about 10/68 to 01/70
new casting, new rubber, steel parts replated, hoses & clamps to install
ADD $25 if old heater valve core not returned

Air Cleaner to Carburetor Gasket--------------------------------------------------
17848-40020 reproduction carburetor to air cleaner seal $8.83
for RT43/52 Corona with the 3R# engines, the RK41 Stout with the 3RB engine, &
RS40l & RS41L with 3RB.
And outside the USA/Canada:
RS5#, 5R 09/67-10/70
RK101 5R 09/67-10/70
RU1 5R 02/69-10/70
RU18,19 2UB 02/69-10/77 (may be for other use on RU18,19??)

Door Drain Hole Dust Seals-----------------------------------------------------------
68231-20010 reproduction door drain hole dust seal $9.00 each,
pack of four (coupe) $32.00, pack of eight (sedan) $56.00
Used on RT4#/5# Corona, & RT6#/7# Corona mark II

Wiring Harness Thru Firewall Grommet-----------------------------------------------
82819-20010 reproduction grommet, main wiring harness thru firewall $12.05
used on RT4#/5#, and it may work on the RT6#/7# with some cutting/fitting of the rubber

Early Heater Cores With Intergral Heater Control Valve--------------------------------
Two early heater cores have been tested good by my radiator shop. I glass beaded the valve (both inner & outer metal is brass) and installed a new O ring & internal retainer before the radiator shop checked the core.
87107-20050-KIT heater core kit for 01/65 to 07/66 (to RT43-30501) $130.00
Includes hoses & clamps to install the core, and the two good ones are boxed ready to ship.

Also available is a kit with a new O ring & clip to repair your own early water valve:
97110-HVKIT-6566 $2.25

Early Radiator Assemblies, Recored---------------------------------------------
16400-40111 radiator assembly, recored, used 01/65 to about 05/67 ATM $440.00
Can also be used on ATM (automatic) or MTM (manual)
Two have been recored and are ready to ship
For hoses & clamps add $44.62
For hoses, clamps & cap add $52.64
Carlyn Dinkler [e-mail]

[gomezsandy]

Carl, do you have a catalog? Even if its a typed sheet? It's hard reading your available parts on this website. Let me know if you do: [e-mail]

Thanks

BTW, I am restoring a 67 Corona and need all sorts of weather stripping for it.

[Carlyn Dinkler]

I will E-mail a list of rubber parts that I have available for the RT43 sedan. Or if you have a coupe, I can E-mail that list.

I am in process (and have been for a long time-each time I get close I have a bunch more changes to add) of getting my catalogs ready to send out as PDF files. The main TU&M catalog is close to 300 pages, the 3RB/3RC engine catalog about 45 pages, the CLIPS catalog (body parts) catalog and literature catalog.
Carlyn Dinkler [e-mail]