|
Post by deluxe on Oct 1, 2008 21:30:16 GMT -8
My 68 corona 3rc is missing the crank pulley bolt, i was wondering if anyone could tell me what other toyota vehicles i could us one from or what size and proper thread pitch of bolt to use?
|
|
|
Post by Carlyn Dinkler on Oct 2, 2008 3:47:50 GMT -8
If the 3RC engine is original (1968), the bolt will be a 12-1.5Px25. You need a 32mm socket for the bolt. If the crank was changed to a later one, the bolt could be a 12-1.25Px24 but that is unlikely.
If you want the bolt 12-1.5x25 bolt & the flat washer used with it(both replated), they are $ 8.75 + $4.80 Priority mail. I take paypal.
Carlyn Dinkler, cdinkler@bellsouth.net
|
|